304DQ DDQ קאַלט ראָולד ומבאַפלעקט שטאָל שפּול
קורץ באַשרייַבונג:
304 DQ DDQ material is widely used as all kinds of stainless steel kitchen wares, DDQ (deep drawing quality) material: refers to the material used for deep drawing (redrawing), which is what we call soft material. The main characteristic of this material is its high elongation (≧53%), hardness Low (≦170%), internal grain grade between 7.0~8.0, excellent deep drawing performance. Many companies that produce thermos and pots generally have higher processing ratios (BLANKING SIZE/product diameter), and their processing ratios are 3.0, 1.96, 2.13, and 1.98, respectively.
Description of 304 DQ DDQ Cold Rolled Stainless Steel Coil, 304 DQ DDQ CRC
- טיפּע: קסנומקסמם - קסנומקסמם
- ברייט: 600 מם - 2000 מם, די נעראָוד פּראָדוקטן ביטע טשעק אין פּאַס פּראָדוקטן
- מאַקסימום קויל וואָג: קסנומקסמט
- קויל ID: קסנומקסמם, קסנומקסמם
- ענדיקן: 2ב,2ד
- Other Names of 304 DQ DDQ: SUS304DQ SUS304DDQ S30408DQ 06Cr19Ni10DQ 0Cr18Ni9DQ S30400DQ
- 304DQ DDQ Chemical Components : C: ≤0.08, Si: ≤0.75 Mn :≤2.0 ,Cr :18.0~20.0 ,Ni :8.0~10.5, S :≤0.03 ,P :≤0.045 N≤0.1
- 304DQ DDQ mechanical properties :
- טענסאַל שטאַרקייַט:> 515 מפּאַ
- טראָגן שטאַרקייַט:>205 מפּאַ
- ילאָנגגיישאַן (%): > 53%
- כאַרדנאַס: <HRB92
Differences in the Applications of 304 DQ DDQ Materials and General Materials:
304DQ DDQ material is mainly used for these higher processing ratio of the product, of course, the processing ratio of more than 2.0 products generally have to undergo a few passes to complete the stretch. If the raw material extension is not reachable, the product can easily produce cracks and pull-throughs when processing deep-drawing products, affecting the qualification rate of finished products, and of course increasing the cost of the manufacturers.
General materials: Mainly used for materials other than DDQ applications. This material is characterized by relatively low elongation (≧45%), relatively high hardness (≦180HB), and internal grain size grade of 8.0~9.0. Compared with DDQ material, its deep drawing performance is relatively poor. It is mainly used for products that can be obtained without stretching, like spoons, spoons, forks, electrical appliances, and steel pipes for a type of tableware. However, it has an advantage over DDQ materials in that BQ properties are relatively good, mainly due to its slightly higher hardness.
ווי אַ לידינג סאַפּלייער פון ומבאַפלעקט שטאָל פּראָדוקטן איבער דער וועלט, סינאָ ומבאַפלעקט שטאָל provides customers with high-quality 304 DQ DDQ Cold Rolled Stainless Steel Coils and other stainless steel products such as הייס-ראָולד ומבאַפלעקט קאָילס, פּאַלישט ומבאַפלעקט שטאָל קוילז, ומבאַפלעקט שטאָל ווירעס, און ומבאַפלעקט שטאָל שיץ at a very competitive price. at a very competitive price.
- פֿריִערדיקע: 316 ל 316 קאַלט ראָולד ומבאַפלעקט שטאָל שפּול
ווייַטער: 316טי קאַלט ראָולד ומבאַפלעקט שטאָל שפּול
קוילד שטאָל טובינג
ומבאַפלעקט שטאָל שפּול ווירע
ומבאַפלעקט שטאָל קאַלט ראָולד קוילז
ומבאַפלעקט שטאָל קאַנדענסער שפּול
ומבאַפלעקט שטאָל בויגן שפּול
ומבאַפלעקט שטאָל סטריפּ שפּול
שטאָל רער שפּול